top of page
Search
diaposgaros1978

Atheros Wireless Lan Driver Windows 10 Acer: A Comprehensive Review



Windows OSes usually apply a generic driver that allows systems to recognize the wireless component. However, in order to use all available features of this hardware, you must install the appropriate drivers. Enabling the wireless card allows systems to read chipset information and manufacturer name, as well as connect to a network without using an Ethernet cable.




Atheros Wireless Lan Driver Windows 10 Acer



Finally I decided to further investigate the current driver installed. Which happen to be the latest updated driver for my wireless adapter. However sometimes the latest drivers can cause problems. Many know that it is always important to update the drivers in your computer and laptop. But at the same it is also important to test the new drivers just in case it causes an issue instead of a solution.


In the following image you will see a list of the drivers from your laptop. Select a different driver and then click on Next button. This will change your wireless adapter to the driver selected. If everything goes well you will see a message displayed, letting you know your driver was updated successfully. It might even ask you to reboot your laptop. If it does simply restart your laptop.


Hi Clare, I am not sure why it has done that. Did you carry out any Windows updates prior to this issue happening? Are you wanting to reinstall all the drivers referring to your wireless card? Is your wireless still working or not?


Hey! My Asus laptop X553M is running on windows 10! I powered it up today and it won't show any available wifi networks, just a symbol for an Ethernet cable with a red "x" on the bottom of the screen. I've tried everything from resetting my network connections but nothing is working and I need the wifi up and running as soon as possible! Unsure if I should buy a wireless adapter to fix this problem (even though connecting to wifi has worked for over a year on this laptop). Any help would be appreciated, thanks!!


mikaylacallery , Make sure you are not in airplane mode, which disables WiFi. You could also try system restore to an earlier date when WiFi was working correctly to see if that helps. Another thing to try, go into settings,device manager, click network adapters, then click on the adapter that is your wireless WiFi. uninstall driver. Then right click on network adapters and click search for network adapters, it should automatically install it back. Try WiFi settings and connect. This is only one of the solutions from link below that you can try to fix your issue. 1st 2nd link troubleshooting WiFi, 3rd link is your manual. Good luck.


Step 2: In the Device Manager window, click on the Network adapter option. From the list of drivers that will open, make a right-click on the wireless adapter. On the context menu, select the Properties option.


Step 2: Just like the above solution, expand the Network adapters option. From the list of device drivers, make a right-click on the wireless driver. From the context menu, select the Update driver option.


You can also try to reinstall the WiFi driver on your PC. Reinstalling the driver will ensure the replacement of faulty or corrupt wireless network adapter driver. For this, you will need to delete the driver software first. Check out the steps:


in most of the cases, Asus laptop does not connect to the wifi because of the wireless network or windows settings issue. if you don't know how to fix it: here are the guide for you. you can apply it on your device.


DISTRIB_ID=UbuntuDISTRIB_RELEASE=10.04DISTRIB_CODENAME=lucidDISTRIB_DESCRIPTION="Ubuntu 10.04.3 LTS"00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011]00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012]00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02)00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02)01:00.0 Ethernet controller [0200]: Atheros Communications Atheros AR8132 / L1c Gigabit Ethernet Adapter [1969:1062] (rev c0)02:00.0 Network controller [0280]: RaLink RT3090 Wireless 802.11n 1T/1R PCIe [1814:3090]Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 001 Device 006: ID 058f:6254 Alcor Micro Corp. USB HubBus 001 Device 002: ID 13d3:5702 IMC NetworksBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubH/W path Device Class Description========================================================= system Notebook/0 bus 1015PE/0/0 memory 64KiB BIOS/0/4 processor Intel(R) Atom(TM) CPU N450 @ 1.6/0/4/5 memory 24KiB L1 cache/0/4/6 memory 512KiB L2 cache/0/4/1.1 processor Logical CPU/0/4/1.2 processor Logical CPU/0/15 memory 1GiB System Memory/0/15/0 memory 1GiB DIMM DDR2 Synchronous 667 MHz/0/15/1 memory DIMM [empty]/0/100 bridge N10 Family DMI Bridge/0/100/2 display N10 Family Integrated Graphics Con/0/100/2.1 display N10 Family Integrated Graphics Con/0/100/1b multimedia N10/ICH 7 Family High Definition A/0/100/1c bridge N10/ICH 7 Family PCI Express Port/0/100/1c.1 bridge N10/ICH 7 Family PCI Express Port/0/100/1c.1/0 network RT3090 Wireless 802.11n 1T/1R PCIe/0/100/1c.3 bridge N10/ICH 7 Family PCI Express Port/0/100/1c.3/0 eth0 network Atheros AR8132 / L1c Gigabit Ether/0/100/1d bus N10/ICH7 Family USB UHCI Controlle/0/100/1d.1 bus N10/ICH 7 Family USB UHCI Controll/0/100/1d.2 bus N10/ICH 7 Family USB UHCI Controll/0/100/1d.3 bus N10/ICH 7 Family USB UHCI Controll/0/100/1d.7 bus N10/ICH 7 Family USB2 EHCI Control/0/100/1e bridge 82801 Mobile PCI Bridge/0/100/1f bridge NM10 Family LPC Controller/0/100/1f.2 scsi0 storage N10/ICH7 Family SATA AHCI Controll/0/100/1f.2/0.0.0 /dev/sda disk 160GB WDC WD1600BEVT-8/0/100/1f.2/0.0.0/1 /dev/sda1 volume 146GiB EXT4 volume/0/100/1f.2/0.0.0/2 /dev/sda2 volume 2906MiB Extended partition/0/100/1f.2/0.0.0/2/5 /dev/sda5 volume 2906MiB Linux swap / Solaris partiLinux mic-laptop 3.1.0-999-generic #201110260408 SMP Wed Oct 26 08:16:44 UTC 2011 i686 GNU/Linux[ 0.000000] Found optimal setting for mtrr clean up[ 0.000000] found SMP MP-table at [c00ff780] ff780[ 0.171304] ACPI: EC: EC description table is found, configuring boot EC[ 0.197561] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored[ 0.200546] ACPI: No dock devices found.[ 0.200552] HEST: Table not found.[ 0.230711] usbcore: registered new interface driver usbfs[ 0.230711] usbcore: registered new interface driver hub[ 0.230711] usbcore: registered new device driver usb[ 0.236049] Switching to clocksource hpet[ 0.239860] Switched to NOHz mode on CPU #0[ 0.239916] Switched to NOHz mode on CPU #1[ 0.256073] pnp: PnP ACPI: found 13 devices[ 0.798218] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0[ 0.802810] ACPI: Lid Switch [LID][ 0.816572] ERST: Table is not found![ 1.170575] isapnp: No Plug & Play device found[ 1.241973] ehci_hcd 0000:00:1d.7: using broken periodic workaround[ 1.260372] hub 1-0:1.0: USB hub found[ 1.261208] hub 2-0:1.0: USB hub found[ 1.261922] hub 3-0:1.0: USB hub found[ 1.262653] hub 4-0:1.0: USB hub found[ 1.263351] hub 5-0:1.0: USB hub found[ 1.329281] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found[ 1.572121] usb 1-6: new high-speed USB device number 2 using ehci_hcd[ 12.934054] lp: driver loaded but no devices found[ 13.142685] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)[ 13.167591] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input5[ 13.167825] usbcore: registered new interface driver uvcvideo[ 13.494237] elantech: assuming hardware version 2, firmware version 20.1.0[ 14.264687] Console: switching to colour frame buffer device 128x37[ 14.493894] ADDRCONF(NETDEV_UP): eth0: link is not ready[ 15.113059] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8[ 15.113824] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9[ 17.348699] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up[ 17.349279] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready[ 27.880040] eth0: no IPv6 routers present[ 2731.368100] usb 1-1: new high-speed USB device number 3 using ehci_hcd[ 2731.501140] hub 1-1:1.0: USB hub found[ 2731.788233] usb 1-1.1: new high-speed USB device number 4 using ehci_hcd[ 2731.954817] usbcore: registered new interface driver uas[ 2731.965896] scsi4 : usb-storage 1-1.1:1.0[ 2731.968368] usbcore: registered new interface driver usb-storage[ 2732.724193] usb 1-1.2: new full-speed USB device number 5 using ehci_hcd[ 2732.812188] usb 1-1.2: device descriptor read/64, error -32[ 2762.460384] usb 1-1.1: USB disconnect, device number 4[ 2898.349486] usb 1-1: USB disconnect, device number 3[ 2898.620099] usb 1-1: new high-speed USB device number 6 using ehci_hcd[ 2898.753189] hub 1-1:1.0: USB hub found[ 3517.848219] usb 1-1.2: new full-speed USB device number 7 using ehci_hcd[ 3517.936215] usb 1-1.2: device descriptor read/64, error -32[ 3518.128209] usb 1-1.2: device descriptor read/64, error -32[ 3518.320199] usb 1-1.2: new full-speed USB device number 8 using ehci_hcd[ 3518.408189] usb 1-1.2: device descriptor read/64, error -32[ 3518.600188] usb 1-1.2: device descriptor read/64, error -32[ 3518.792314] usb 1-1.2: new full-speed USB device number 9 using ehci_hcd[ 3519.200079] usb 1-1.2: device not accepting address 9, error -32[ 3519.288303] usb 1-1.2: new full-speed USB device number 10 using ehci_hcd[ 3519.696089] usb 1-1.2: device not accepting address 10, error -32[ 3636.316211] usb 1-1.2: new full-speed USB device number 11 using ehci_hcd[ 3636.404207] usb 1-1.2: device descriptor read/64, error -32[ 3636.596308] usb 1-1.2: device descriptor read/64, error -32[ 3636.788187] usb 1-1.2: new full-speed USB device number 12 using ehci_hcd[ 3636.880292] usb 1-1.2: device descriptor read/64, error -32[ 3637.072308] usb 1-1.2: device descriptor read/64, error -32[ 3637.264165] usb 1-1.2: new full-speed USB device number 13 using ehci_hcd[ 3637.672065] usb 1-1.2: device not accepting address 13, error -32[ 3637.760267] usb 1-1.2: new full-speed USB device number 14 using ehci_hcd[ 3638.168088] usb 1-1.2: device not accepting address 14, error -32[ 3648.584283] usb 1-1.2: new full-speed USB device number 15 using ehci_hcd[ 3648.672278] usb 1-1.2: device descriptor read/64, error -32[ 3648.864271] usb 1-1.2: device descriptor read/64, error -32[ 3649.056271] usb 1-1.2: new full-speed USB device number 16 using ehci_hcd[ 3649.144250] usb 1-1.2: device descriptor read/64, error -32[ 3649.336266] usb 1-1.2: device descriptor read/64, error -32[ 3649.528248] usb 1-1.2: new full-speed USB device number 17 using ehci_hcd[ 3649.940115] usb 1-1.2: device not accepting address 17, error -32[ 3650.028209] usb 1-1.2: new full-speed USB device number 18 using ehci_hcd[ 3650.436121] usb 1-1.2: device not accepting address 18, error -32 Release Date: 07/12/2010 Serial services are supported (int 14h) Manufacturer: ASUSTeK Computer INC. Product Name: 1015PE Serial Number: A8OAAS190648 Manufacturer: ASUSTeK Computer INC. Product Name: 1015PE Serial Number: EeePC-0123456789 Manufacturer: ASUSTeK Computer INC. Serial Number: 0x00000000 Manufacturer: Intel Serial Number: To Be Filled By O.E.M. Port Type: Serial Port 16550A Compatible Manufacturer: Manufacturer00 Serial Number: SerNum00 Manufacturer: Manufacturer01 Serial Number: SerNum01lo no wireless extensions. 2ff7e9595c


0 views0 comments

Recent Posts

See All

`Tic tac toe apk sem anúncios`

Tic Tac Toe APK Sin Anuncios: Un Juego Clásico y Divertido Você gosta de jogos de lógica e estratégia? Você quer passar um bom momento...

Comments


bottom of page